LOCKBOLT

Operating principle

LOCKBOLT

Vibration & shock can quickly impair the tightness of the joint & affect overall product performance.
By Fastening with Pl Lockbolts you are assured of a high vibration-resistant connection. The collar is swaged into the annular locking grooves of the lockbolt, forming a permanent Iock with uniform clamp, tensile and shear values.

Installation is simple, fast and virtually foolproof even with unskilled personnel.
Pl Lockbolts will pay off handsomely by lowering installation costs & improving product quality and reliability. Seeing is believing.Ask for a demonstration to fully appreciate this remarkable fastening system.

Pl Lockbolt pin is inserted in workpiece and collar is placed over pintail.

Nose assembly is placed over pintail.When the installation tool is activated, the nose assembly pulls on the pin & the swaging anvil forces the collar against the work-piece, drawing the worksheets tighter together.

As the pull on the pin increases, the swaging anvil moves over the collar,swaging the collar into the annular locking grooves.

Continued build-up of opposing forces by the installation tool causes the pin to break at the break-neck. The cycle of the installation tool is then reversed, causing the built-in release and ejector to push the tool off the installed fastener,A full swage is sufficient to ensure correct clamp-up.

LOCKBOLT
LOCKBOLT LOCKBOLT

The installed Pl Lockbolts, regardless of headstyle, provides a rugged, vibration-resistant fastener, with greater economy than is achieved with other methods.

Pl hi-strength LOCKBOLT pins

Steel - round, truss & countersunk head

Pl Lockbolt pins are ideal for use in mmmg, construction and rail road industries, as well as other heavy-duty applications where consistent, uniform clamp force is required. Totally resistant to vibration and stronger and more dependable than ordinary nuts and bolts or welded joints. Pl Lockbolts are available in diameters rangingfrom ½" to 1-3/8".

LOCKBOLT
LOCKBOLT
LOCKBOLT
LOCKBOLT

Meets the mechanical properties and material specifications according to BS 7805 : Part 2: 1997

Part N° Diameter Ref. A D Min Hole Ø Max Rounded Head Truss Head CSK. Head
B C B C B C
LB[x]S-16[y] (1/2") 12.52 - 13.08 72.00 14.3 22.81 - 24.46 6.76 - 9.55 23.4 6.0 23.0 6.4
LB[x]S-20[y] (5/8") 15.67 - 16.31 84.50 17.5 27.58 - 30.38 9.32 - 10.97 29.0 7.1 29.4 7.9
LB[x]S-24[y] (3/4") 18.82 - 19.00 97.00 20.6 33.73 - 36.53 11.56 - 13.46 34.9 8.7 34.9 9.5
LB[x]S-28[y] (7/8") 22.00 - 22.73 104.20 23.8 39.29 - 42.06 13.49 - 14.68 40.5 10.3 40.5 11.1
LB[x]S-32[y] (1") 25.15 - 25.96 121.50 27.0 45.67 - 48.72 14.76 - 16.41 46.4 11.9 46.8 12.7
LB[x]S-36[y] (1-1/8") 27.89 - 29.18 126.00 30.2 51.50 - 53.50 16.50 - 18.50 --- --- --- ---
LB[x]S-44[y] (1-3/8") 34.29 - 35.56 169.00 38.1 62.74 - 65.79 20.70 - 22.35 --- --- --- ---

x : Select Head Style : R=Round, T=Truss, 30=Large Truss, 90=Countersunk
y : Select Grip Number (See Table below) e

Material : Carbon Steel
All dimensions are in millimeters

Grip data & dimensions
Grip N° Grip N°
04 6.4 - 12.7
08 12.7 - 19.1
12 19.1 - 25.4
16 25.4 - 31.8
20 31.8 - 38.1
24 38.1 - 44.5
28 44.5 - 50.8
32 50.8 - 57.2
36 57.2 - 63.5
40 63.5 - 69.9
44 69.9 - 76.2
48 76.2 - 82.6
52 82.6 - 88.9
For LB1-3/8"
Grip N° Grip Range
6" 149.2 - 165.1
7" 174.6 - 190.5
8" 200.0 - 215.9
9" 225.4 - 241.3
10" 250.8 - 266.7
11" 276.2 - 292.1
12" 301.6 - 317.5
13" 327.0 - 342.9
14" 352.4 - 368.3
15" 377.8 - 393.7
16" 403.2 - 419.1
17" 428.6 - 444.5
18" 454.0 - 469.9
19" 479.4 - 495.3
20" 504.8 - 520.7
21" 530.2 - 546.1
22" 555.6 - 571.5
Strength values (kN)
Dia Shear Clamp Tensile
16 64.05 53.60 75.85
20 100.80 85.41 120.55
24 144.12 126.33 178.37
28 193.05 174.59 246.65
32 251.30 229.10 323.40
36 309.10 260.00 369.00
44 444.80 378.10 576.00

Grip range starts from 102.0 mm up to 870.0 mm max. Contact Pl for grip range details.

Ordering example :

LBRS - 1604 = Round Head, ½" Diameter with grip range of 6.4 - 12. 7 mm

Pl LOCKBOLT collars

Standard

Part N° Diameter
Ref.		 F G H
LCSS-16G 1/2" 13.08 - 13.72 19.43 - 20.32 15.49 - 16.38
LCSS-20G 5/8" 16.51 - 16.89 24.64 - 25.65 21.46 - 22.23
LCSS-24G 3/4" 19.69 - 20.07 29.59 - 29.97 23.62 - 24.38
LCSS-28G 7/8" 21.11 - 23.75 34.16 - 34.93 27.51 - 28.27
LCSS-32G 1" 26.39 - 26.59 39.52 - 39.73 31.62 - 32.38
LCSS-36G 1-1/8" 29.20 - 30.00 44.20 - 45.00 35.20 - 36.20
LCSS-44G 1-3/8" 35.92 - 36.12 54.46 - 54.66 44.20 - 44.70
Material Steel
Finish Zinc Plated

All dimensions are in millimeters

LOCKBOLT LOCKBOLT

Flanged

Part N° Diameter
Ref.		 F G H J K
LCFS-16G 1/2" 12.95 - 13.46 20.14 - 20.50 18.34 - 19.30 3.05 - 3.30 24.89 - 26.29
LCFS-20G 5/8" 16.46 - 16.76 24.89 - 25.30 23.52 - 24.43 3.61 - 4.32 31.17 - 32.33
LCFS-24G 3/4" 19.69 - 20.14 29.85 - 30.35 28.32 - 29.21 4.45 - 5.08 37.59 - 38.61
LCFS-28G 7/8" 22.73 - 23.04 34.54 - 34.80 33.02 - 33.86 5.21 - 5.84 40.1 - 41.02
LCFS-32G 1" 26.29 - 26.67 39.37 - 39.75 37.59 - 38.61 6.02 - 6.68 47.09 - 48.08
LCFS-36G 1-1/8" 29.46 - 29.72 44.45 - 44.70 42.55 - 43.56 6.93 - 7.34 53.47 - 54.48
Material Steel
Finish Zinc Plated
LOCKBOLT LOCKBOLT

Note :When using LCFS Collars (Flange Type) include "J" dimensions as part of the total material thickness to determine the correct lockbolt pin grip number

All dimensions are in millimeters

Collar inspection data sheet

Diameter Lockbolt PIN Std. Collar Flange Collar A (max) B (max) C (min) D (max)
3/8" LB( )S-12( ) LCSS-12 LCFS-12 3.2 5.5 8.7 14.0
1/2" LB( )S-16( ) LCSS-16 LCFS-16 1.6 9.5 10.3 18.6
5/8" LB( )S-20( ) LCSS-20 LCFS-20 1.6 9.5 15.9 23.3
3/4" LB( )S-24( ) LCSS-24 LCFS-24 1.6 9.5 16.7 28.2
7/8" LB( )S-28( ) LCSS-28 LCFS-28 1.6 9.5 19.1 32.6
1" LB( )S-32( ) LCSS-32 LCFS-32 1.6 9.5 22.2 37.2
1-1/8" LB( )S-36( ) LCSS-36 --- 1.6 9.5 23.0 41.8
1-3/8" LB( )S-44( ) LCSS-44 --- 4.8 17.5 31.8 51.3
LOCKBOLT

1. All dimensions are in millimeters (mm) unless otherwise noted.
2. To stay within the correct grip conditions, figures for "A" and "B" must be adhered to.
3. Figures in excess of "D" dimensions above typically indicates a worn - out swaging anvil and must be replaced immediately.
4. Swage depth lower than "C" above indicates either the swaging anvil is worn - out or lack of collar lubrication, or hardness problem with the lockbolt pin or the collar.

SD LOCKBOLT PINS

Steel, aluminium & stainless steel (3/16" & 1/4" diameter)

Vibration-resistant SD fasteners install with consistency and control. They resist loosening due to vibration and provide a high uniform clamp force.This is an excellent fastener for a wide range of structural applications.With a simple and fast installation process, the SD fastener holds the joints tight, every time.Available in steel, stainless steel & aluminium mate rial ranging from 3/ 16" to 3/8" diameters.

LOCKBOLT
LOCKBOLT
LOCKBOLT
LOCKBOLT
Part N° Diameter Ref. A Round Head Truss Head Counter Sunk Head
B C B C B C
SDL[x][y]-06[z] (3/16") 4.8 - 4.9 9.0 - 10.0 2.9 - 3.2 10.0 - 11.9 2.0 - 2.2 8.3 - 9.0 1.9 - 2.2
SDL[x][y]-08[z] (1/4") 6.4 - 6.6 12.1 - 13.3 3.5 - 3.9 13.5 - 15.1 2.6 - 2.9 11.1 - 12.0 2.6 - 2.9

x : Select Head Style : R=Round, T=Truss, 30=Large Truss, 90=Countersunk
y : Select Material : S=Steel, A=Aluminium, U=Stainless Steel
z : Selm G,lp N,mbe, (See Table below)

Grip N° Grip Range D (length)
06 (3/16") 08 (1/4")
02 1.57 - 4.75 34.93 38.10
04 4.75 - 7.92 38.10 41.30
05 6.35 - 9.53 39.70 42.90
06 7.92 - 11.10 41.30 44.50
08 11.10 - 14.27 44.50 47.60
10 14.27 - 17.45 47.62 50.80
12 17.45 - 20.62 50.80 53.98
14 20.62 - 23.80 53.98 57.15
16 23.82 - 26.97 57.15 60.30
18 26.97 - 30.15 60.30 63.50
20 30.16 - 33.34 63.50 66.70
22 33.34 - 36.51 66.70 69.85
24 36.51 - 39.69 69.85 73.02
26 39.69 - 42.86 73.02 76.20
28 42.86 - 46.06 76.20 79.40
30 46.04 - 49.21 79.40 82.55
32 49.21 - 52.39 82.55 85.73
Material Finish
Steel (G) Zinc Plated
Aluminium Natural
Stainless Steel Natural

Ordering example

SDLRS - 0804G

Round Head, l /4" diameter with grip range of 4.75 - 7.92 mm, Steel

All dimensions are in millimeters

Steel, aluminium & stainless steel (5/16" & 3/8" diameter)

LOCKBOLT
LOCKBOLT
LOCKBOLT
Part N° Diameter Ref. A Round Head Truss Head Countersunk Head
B C B C B C
SDL[x][y]-10[z] (5/16") 8.1 - 8.3 15.7 - 16.7 4.6 - 5.1 17.9 - 20.2 3.2 - 3.6 13.9 - 14.9 3.2 - 3.6
SDL[x][y]-12[z] (3/8") 9.6 - 9.8 18.1 - 20.0 5.7 - 6.3 21.0 - 23.4 3.9 - 4.3 16.7 - 18.0 3.9 - 4.3

x : Select Head Style : R=Round, T=Truss, 30=Large Truss, 90=Countersunk
y : Select Material : S=Steel, A=Aluminium, U=Stainless Steel
z : Select Grip Number (See Table below)

Grip N° Grip Range D (length)
10 (5/16") 12 (3/8")
04 3.18 - 9.53 48.42 53.98
06 6.35 - 12.7 51.59 57.15
08 9.53 - 15.88 54.77 60.33
10 12.70 - 19.05 57.94 63.50
12 15.88 - 22.23 61.12 66.68
14 19.05 - 25.4 64.29 69.85
16 22.23 - 28.58 67.47 73.03
18 25.40 - 31.75 70.64 76.20
20 28.58 - 34.93 73.82 79.38
22 31.75 - 38.10 76.99 82.55
24 34.93 - 41.28 80.17 85.75
26 38.10 - 44.45 83.34 88.90
28 41.28 - 47.63 86.52 92.08
30 44.45 - 50.80 89.70 95.25
32 47.63 - 53.98 92.87 84.43
Material Finish
Steel (G) Zinc Plated
Aluminium Natural
Stainless Steel Natural

Ordering example

SDL90U- l 2 l 6= Countersunk Head, 3/8" diameter with grip range of 22.23 - 28.58 mm, Stainless Steel

All dimensions are in millimeters

Fastener strength values

Ø Ref. -Steel- -Aluminium- -Stainless Steel-
Shear Clamp Tensile Shear Clamp Tensile Shear Clamp Tensile
06 7.67 4.54 7.33 4.67 2.44 4.43 8.89 4.54 6.45
08 13.55 8.02 13.32 8.33 4.21 7.99 1.57 8.01 12.22
10 21.00 12.48 20.44 12.99 6.67 12.67 24.56 12.48 18.88
12 30.33 17.86 28.89 18.67 9.78 18.67 35.34 17.86 27.10

All strength values are in kN

SD Collars

LCS (standard)

LOCKBOLT
LOCKBOLT
Part N° Ø Ref. F Ø G Ø H Length J K Ø
LCS[x]-06 3/16" 4.75 - 4.98 7.72 - 7.90 5.54 - 6.30 --- ---
LCS[x]-08 1/4" 6.50 - 6.73 10.20 - 10.40 7.37 - 8.13 --- ---
LCS[x]-10 5/16" 7.72 - 7.92 12.30 - 12.50 8.89 - 9.65 --- ---
LCS[x]-12 3/8" 9.53 - 9.78 14.90 - 15.30 10.90 - 11.70 --- ---

x : Select Grip Number (See Table below)

Ordering example :

LCSS - 08 1 /4" Standard Collar, Steel, Zinc Plated

All dimensions are in millimeters

LCF (flanged)

LOCKBOLT
LOCKBOLT
Part N° Ø Ref. F Ø G Ø H Length J K Ø
LCF[x]-06 3/16" 4.75 - 4.98 7.72 - 7.90 5.54 - 6.30 0.8 - 1.6 9.1 - 9.9
LCF[x]-08 1/4" 6.50 - 6.73 10.20 - 10.40 7.37 - 8.13 1.2 - 2.0 12.3 - 13.1
LCF[x]-10 5/16" 7.72 - 7.92 12.30 - 12.50 8.89 - 9.65 1.6 - 2.4 15.5 - 16.3
LCF[x]-12 3/8" 9.53 - 9.78 14.90 - 15.30 10.90 - 11.70 1.6 - 3.2 18.3 - 19.8
Material Finish
S = Steel (G) Zinc Plated
A = Aluminium Natural
U = Stainless Steel Natural

Ordering example

LCFU - 12 3/8" Flanged Collar, Stainless Steel.

All dimensions are in millimeters

Multi-grip LOCKBOLT PINS

Steel - Brazier head

Available in steel and aluminium materials, MULTI-GRIP fasteners are cost-effective solution when working with mate rials with varying thicknesses. The MULTI-GRIPdesign reduces inventory part numbers and ensures lower installer and rework costs with a clean, uniform installation process.The typical grip range of a 1/4" MULTI-GRIP is 1.6mm - 16mm and is suitable for a wide variety of applications such as truck & trailer bodies, electrical cabinets and bus bodies.

LOCKBOLT
LOCKBOLT
Part N° Lockbolt Ø Hole Ø Grip Range D K F Shear Strength Tensile Strength
MLGB-0610S 4.8 (3/16") 5.1 1.6 - 15.9 10.0 3.4 2.3 7.59 7.29
MLGB-0620S 7.9 - 31.7 8.4
MLGB-0810S 6.4 (1/4") 6.7 1.6 - 15.9 13.3 4.1 2.2 13.38 13.28
MLGB-0820S 7.9 - 31.7 9.1
LOCKBOLT
Matching Collars Ø Ref A B C D E
MLGC-R6G 3/16" 7.85 - 7.92 4.84 - 4.91 6.86 - 7.11 1.07 - 1.27 9.35 - 9.70
MLGC-R8G 1/4" 10.16 - 10.23 6.46 - 6.52 9.40 - 9.65 1.45 - 1.70 12.45 - 12.95

All dimensions are in millimeters, Strength values are in kN

Steel - Countersunk head

LOCKBOLT
Part N° Lockbolt Ø Hole Ø Grip Range D K F Shear Strength Tensile Strength
MLG90-0610S 4.8 (3/16") 5.1 2.4 - 15.9 8.8 2.2 4.3 7.59 7.29
MLG90-0620S 7.9 - 31.7 9.4
MLG90-0810S 6.4 (1/4") 6.7 1.6 - 15.9 13.3 4.1 2.2 13.38 13.28
MLG90-0820S 7.9 - 31.7 9.1
LOCKBOLT
Matching Collars Ø Ref A B C D E
MLGC-R6G 3/16" 7.85 - 7.92 4.84 - 4.91 6.86 - 7.11 1.07 - 1.27 9.35 - 9.70
MLGC-R8G 1/4" 10.16 - 10.23 6.46 - 6.52 9.40 - 9.65 1.45 - 1.70 12.45 - 12.95

All dimensions are in millimeters, Strength values are in kN

Steel - Truss head

LOCKBOLT
LOCKBOLT
Part N° Lockbolt Ø Hole Ø Grip Range D K F Shear Strength Tensile Strength
MLGT-0610S 4.8 (3/16") 5.1 1.6 - 15.9 11.9 2.8 2.3 7.59 7.29
MLGT-0620S 7.9 - 31.7 8.4
MLGT-0810S 6.4 (1/4") 6.7 1.6 - 15.9 15.1 3.1 2.2 13.38 13.28
MLGT-0820S 7.9 - 31.7 9.1
LOCKBOLT
Matching Collars Ø Ref A B C D E
MLGC-R6G 3/16" 7.85 - 7.92 4.84 - 4.91 6.86 - 7.11 1.07 - 1.27 9.35 - 9.70
MLGC-R8G 1/4" 10.16 - 10.23 6.46 - 6.52 9.40 - 9.65 1.45 - 1.70 12.45 - 12.95

All dimensions are in millimeters, Strength values are in kN

Aluminium - Brazier head

LOCKBOLT
Part N° Lockbolt Ø Hole Ø Grip Range D K F Shear Strength Tensile Strength
MLBG-0610A 4.8 (3/16") 5.1 1.6 - 15.9 10.0 3.4 2.3 4.49 4.40
MLBG-0620A 7.9 - 31.7 8.4
MLBG-0810A 6.4 (1/4") 6.7 1.6 - 15.9 13.3 4.1 2.2 8.29 7.89
MLBG-0820A 7.9 - 31.7 9.1
LOCKBOLT
Matching Collars Ø Ref A B C D E
MLGC-F6 3/16" 7.85 - 7.92 4.84 - 4.91 6.86 - 7.11 1.07 - 1.27 9.35 - 9.70
MLGC-F8 1/4" 10.16 - 10.23 6.46 - 6.52 9.40 - 9.65 1.45 - 1.70 12.45 - 12.95

All dimensions are in millimeters, Strength values are in kN

Sie möchten Kontakt mit uns aufnehmen?

Finden Sie uns